 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MSR1560 SWITCHMODETM Soft Recovery Power Rectifier Designed for boost converter or hard-switched converter applications, especially for Power Factor Correction application. It could also be used as a free wheeling diode in variable speed motor control applications and switching mode power supplies. These state-of-the-art devices have the following features: http://onsemi.com * Soft Recovery with Low Reverse Recovery Charge (QRR) and Peak * * * * * * Reverse Recovery Current (IRRM) 150C Operating Junction Temperature Popular TO-220 Package Epoxy meets UL94, VO @ 1/8 Low Forward Voltage Low Leakage Current High Temperature Glass Passivated Junction SOFT RECOVERY POWER RECTIFIER 15 AMPERES 600 VOLTS 1 4 3 MARKING DIAGRAM 4 4 CASE 221B TO-220 PLASTIC MSR1560 1 1 3 3 Mechanical Characteristics: * Case: Molded Epoxy * Weight: 1.9 Grams (approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal * * * Leads Readily Solderable Lead Temperature for Soldering Purposes: 260C Max. for 10 Seconds Shipped in 50 Units per Plastic Tube Marking: MSR1560 ORDERING INFORMATION Device MSR1560 Package TO-220 Shipping 50 Units/Rail (c) Semiconductor Components Industries, LLC, 2000 1 October, 2000 - Rev. 2 Publication Order Number: MSR1560/D MSR1560 MAXIMUM RATINGS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (At Rated VR, TC = 125C) Peak Repetitive Forward Current (At Rated VR, Square Wave, 20 kHz, TC = 125C) Non-Repetitive Peak Surge Current (Surge applied at rated load conditions, halfwave, single phase, 60 Hz) Storage / Operating Case Temperature Operating Junction Temperature Symbol VRRM VRWM VR IO IFRM IFSM Tstg, TC TJ Value 600 Unit V 15 30 100 - 65 to 150 - 65 to 150 A A A C C C/W THERMAL CHARACTERISTICS Thermal Resistance -- Junction-to-Case Thermal Resistance -- Junction-to-Ambient RqJC RqJA 1.6 72.8 ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage (Note 1.) (IF = 15 A) a u s a a eous o a d o age ( o e ) ( 5) VF TJ = 25C 1.8 1.5 IR TJ = 25C 15 0.4 trr TJ = 25C 45 35 s = tb/ta IRRM QRR TJ = 150C 1.4 1.2 TJ = 150C 5000 100 TJ = 100C 65 54 ns s m mA V Typical Maximum Instantaneous Reverse Current (VR = 600 V) a u s a a eous e e se Cu e ( ) Typical Maximum Reverse Recovery Time ( o e 2.) ( R = 30 V, IF = 1 A, d /d = 100 A/ms) a u e e se eco e y e (Note ) (V , , di/dt 00 /ms) Typical Typical Recovery Softness Factor (VR = 30 V, IF = 1 A, di/dt = 100 A/ms) Typical Peak Reverse Recovery Current (VR = 30 V, IF = 1 A, di/dt = 100 A/ms) Typical Reverse Recovery Charge (VR = 30 V, IF = 1 A, di/dt = 100 A/ms) 1. Pulse Test: Pulse Width 380 s, Duty Cycle 2% 2. TRR measured projecting from 25% of IRRM to zero current .67 2.3 31 .74 3.2 78 A nC http://onsemi.com 2 MSR1560 100 100 VF @ 175C IF, INSTANTANEOUS FORWARD CURRENT (AMPS) VF @ 25C 10 IF, INSTANTANEOUS FORWARD CURRENT (AMPS) VF @ 175C VF @ 25C 10 zl VF @ 100C VF @ 100C 1 1 0.1 0.3 0.7 1.1 1.5 1.9 2.3 2.7 0.1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 VF, INTANTANEOUS VOLTAGE (VOLTS) VF, INSTANTANEOUS FORWARD CURRENT (AMPS) Figure 1. Maximum Forward Voltage Figure 2. Typical Forward Voltage 10000 IR, REVERSE CURRENT (A) VF @ 175C 1000 IR, REVERSE CURRENT (A) 100 10 1 0.1 Ir @ 25C 0.01 Ir @ 100C 1000 Ir @ 175C 100 VF @ 100C 10 VF @ 25C 1 0.1 0 100 200 300 400 500 600 0.001 0 100 200 300 400 500 600 VR, REVERSE VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS) Figure 3. Maximum Reverse Current Figure 4. Typical Reverse Current http://onsemi.com 3 MSR1560 IF(AV), AVERAGE FORWARD dc 20 TJ = 175C PF(AV), AVERAGE POWER DISSIPATION (WATTS) 25 30 TJ = 175C Square Wave dc 20 15 Square Wave 10 10 5 0 0 0 10 20 IF(AV), AVERAGE FORWARD CURRENT (AMPS) 0 50 100 150 200 TC, CASE TEMPERATURE (C) Figure 5. Current Derating Figure 6. Power Dissipation 400 350 C, CAPACITANCE (pF) 300 250 200 150 100 50 0 0 10 20 30 40 50 VR, REVERSE VOLTAGE (VOLTS) TJ = 25C C, CAPACITANCE (pF) 350 300 250 200 150 100 50 0 0 TJ = 25C 10 20 30 40 50 VR, REVERSE VOLTAGE (VOLTS) Figure 7. Maximum Capacitance 60 50 60 Time (nsec) Time (nsec) 40 30 ta vs. di/dt @ 25C 20 20 10 0 25 tb vs. di/dt @ 25C 0 25 Trr vs. di/dt @ 25C 80 Figure 8. Typical Capacitance trr 40 ta tb 100 dI/dt (A/S) 175 250 75 125 175 TEMPERATURE (C) Figure 9. Typical Trr vs. di/dt Figure 10. Typical Trr vs. Temperature http://onsemi.com 4 MSR1560 QRR, REVERSE RECOVERY CHARGE (nC) 50 IRRM, PEAK RECOVERY CURRENT (AMPS) 3 IF = 1 A 2 TJ = 25C 40 IF = 1 A TJ = 25C 30 20 1 0 25 75 125 dI/dt (A/S) 175 225 25 100 dIF/dt (A/S)) 175 250 Figure 11. Typical Peak Reverse Recovery Current EOFF, SWITCHING OFF LOSSES (J) 65 Figure 12. Typical Reverse Recovery Charge 55 IF = 1 A 45 VR = 30 V 35 25 25 100 dIF/dt (A/S) 175 250 Figure 13. Typical Switching Off Losses http://onsemi.com 5 MSR1560 10 R(t), TRANSIENT THERMAL RESISTANCE ID = 0.5 1 0.1 0.05 0.01 Single Pulse 0.1 0.0001 0.001 0.01 t, Time (S) 0.1 1 10 Figure 14. Transient Thermal Response http://onsemi.com 6 MSR1560 PACKAGE DIMENSIONS TO-220 PLASTIC CASE 221B-04 ISSUE D C Q B F T S NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. DIM A B C D F G H J K L Q R S T U INCHES MIN MAX 0.595 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.190 0.210 0.110 0.130 0.018 0.025 0.500 0.562 0.045 0.060 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 MILLIMETERS MIN MAX 15.11 15.75 9.65 10.29 4.06 4.82 0.64 0.89 3.61 3.73 4.83 5.33 2.79 3.30 0.46 0.64 12.70 14.27 1.14 1.52 2.54 3.04 2.04 2.79 1.14 1.39 5.97 6.48 0.000 1.27 4 A 1 3 U H K L G D J R STYLE 1: PIN 1. 2. 3. 4. CATHODE N/A ANODE CATHODE http://onsemi.com 7 MSR1560 SWITCHMODE ia a trademark of Semiconductor Components Industries, LLC (SCILLC). ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com Fax Response Line: 303-675-2167 or 800-344-3810 Toll Free USA/Canada N. American Technical Support: 800-282-9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (Mon-Fri 2:30pm to 7:00pm CET) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (Mon-Fri 2:00pm to 7:00pm CET) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (Mon-Fri 12:00pm to 5:00pm GMT) Email: ONlit@hibbertco.com EUROPEAN TOLL-FREE ACCESS*: 00-800-4422-3781 *Available from Germany, France, Italy, UK, Ireland CENTRAL/SOUTH AMERICA: Spanish Phone: 303-308-7143 (Mon-Fri 8:00am to 5:00pm MST) Email: ONlit-spanish@hibbertco.com ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001-800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-0031 Phone: 81-3-5740-2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. http://onsemi.com 8 MSR1560/D |
Price & Availability of MSR1560
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |